cara memperbaiki flashdisk write protected dengan software

4 Ways to Repair Write Protected Flashdisk with Software

*Artikel diperbarui pada 15 August 2023

A pendrive can enter write protected mode due to various conditions. Below is how to fix a write protected pendrive with third-party software that you can easily try.

A pendrive is a portable storage that has various storage capacities. Some people today still choose to use a flash drive over other storage media.

However, some problems can occur with flash drives. One of them is the flashdisk entering write protected mode. Here’s an explanation of write protected flashdisks and ways to solve them.

What is a Write Protected Flashdisk?

Before learning how to fix a Write Protected Flashdisk with software or not, it is important for users to know what a write protected flashdisk is. A write protected pendrive cannot have its files edited or formatted.

In essence, nothing can be done to the pendrive. Write protected is like the flash drive is locked or has its edit access turned off.

There are many things that cause a pendrive to enter this mode. Maybe the owner intentionally locked the flash drive to provide additional protection, because the files inside are confidential.

Write protected can also occur due to a virus on the PC that the pendrive has visited. So users need to be careful when installing a pendrive into a PC that is not their own.

Another cause of write protected can also be due to careless use of the pendrive. Forgetting to eject when unplugging the pendrive, for example. Or unplugging the pendrive from the port while the files on it are being opened.

4 Ways to Fix Write Protected Flashdisk with Software

The problem of the flash drive entering write protected mode can be solved with software or without software. Here are some ways to fix a write protected pendrive with software that you can try:

1. Using FAT32 Format GUI

The first software that can be tried is FAT32 Format GUI. This software works to format all types of flash drives. Download the software through this link https://fat32format-gui.en.lo4d.com/windows. Here are the steps to use it:

  • Download the software.
  • Install the software onto your PC.
  • Open the application.
  • Select the disk that belongs to the flashdisk to be formatted, or the flashdisk that is being write protected.
  • Then check “Quick Format”.
  • Click “Start”, and the formatting process will begin immediately.
  • Wait for a while until the process is complete.
  • Check the flash drive that has been formatted again.

2. Using HP USB Disk Storage Format Tool

The next application or software that can be tried is software produced by Hewlett-Packarge (HP), namely the HP USB Disk Storage Format Tool. Download this second software via this link https://www.softpedia.com/get/System/Hard-Disk-Utils/HP-USB-Disk-Storage-Format-Tool.shtml. The following steps can be done:

  • Download and install the software to your PC.
  • Open the application, select the disk that belongs to the flashdisk to be formatted.
  • Check the “Quick Format” column.
  • Click “Start” to begin the formatting process.
  • Wait a while for the formatting process to finish, then check the formatted disk again.
  • If it doesn’t open, try repeating the formatting procedure in the same way.

3. Using USB Write Protect

The third way to fix a write protected flashdisk with software that you can try is with USB Write Protect. Download the USB Write Protect software via this link https://www.techspot.com/downloads/6256-usb-write-protect.html. Here are the steps to use it to overcome the write protected flashdisk:

  • Make sure the USB Write Protect software has been downloaded and installed on your PC.
  • Open the application.
  • Plug the pendrive to be formatted into the PC’s USB port.
  • Right-click on the USB Write Protect application, then select “Run as administrator”.
  • Disable the protection status of the pendrive by selecting “Disable”.
  • When the status has changed to “Disabled”, it means that write protect is no longer active on the pendrive.
  • Close the application. Check the pendrive again.
  • Don’t forget to “Eject” before unplugging the pendrive.

4. Low Level Format Tool

The last software to try is the Low Level Format Tool. Low Level Format is available for free and is available for PCs with Windows operating systems.

Low Level Format can be downloaded through this link https://hddguru.com/software/HDD-LLF-Low-Level-Format-Tool/. Here’s how to use this software to overcome the write protected flashdisk:

  • Make sure the Low Level Format software has been downloaded and installed on the PC.
  • Open the software or application.
  • Plug the pendrive to be formatted into the PC’s USB port.
  • In the Low Level Format view that opens, select the USB disk to be formatted.
  • Click “Format This Device”.
  • Wait a few minutes for the formatting process to complete.
  • Check the flashdisk again that has been formatted.

That’s the explanation of what a write protected flashdisk is and how to solve a write protected flashdisk with easy-to-do third-party software. The four recommended applications are very light so they don’t require a large space.

All four recommended applications are also free and publicly and freely available. If one app doesn’t solve the problem, you can try other apps on the recommended list.

Check Also

cara mengatasi corel illegal software

3 Ways to Solve Corel Illegal Software Easily and Practically

*Artikel diperbarui pada 6 November 2023 Corel Draw software users must often get corel illegal …

Theme Settings